Technical Specifications
Unisil H
Physical Characteristics
| Residual Curvature | mm |
|---|---|
| Edge camber | |
| Max. edge camber for measuring length 1500mm on material > 150mm | 0.5 |
| Flatness | |
| Burr height for slit coil, max. | 0.025 |
| Thickness tolerance | |
|---|---|
| Nominal thickness mm | Weight per unit area kg/m2 |
| 0.23 | 1.721 |
| 0.27 | 2.023 |
| 0.30 | 2.257 |
| 0.35 | 2.654 |
Measurement methods for thickness and width are given in the product standard EN10107 and IEC 60404-8-7.
All other measuring methods and definitions are available in EN10251 and IEC 60404-9